Categories

The GD&T Hierarchy Y14.5-2009 Textbook
The GD&T Hierarchy Y14.5-2009 Textbook
Fundamentals Full Color Textbook - Now with Coach Codes and Molded Parts Supplement
by Don Day
(in accordance with Y14.5-2009)
ISBN 978-0-9844325-6-1

Product Code:1200

US$99.50

Textbook With Solutions

With Solutions + US$20.00 


Tell a friend about this site or product

Looking for an interactive GD&T experience?  Look no further!  The GD&T Hierarchy Text now has Coach Codes that allow you to use any device with a QR Reader to make the book come alive.  Simply scan the codes throughout the book and watch a video on the concept being covered.

Why buy two textbooks when one will do the job? 

The GD&T Hierarchy textbook is intended to aid in the instruction of Geometric Dimensioning and Tolerancing (GD&T) in accordance with the ASME Y14.5-2009 standard as well as the ASME Y14.5M-1994.  Where a concept is new to the 2009 revision of the Standard it has a shaded background.  Coverage also includes selected topics from ASME Y14.41.

This full color text is in landscape format which made it possible to include more complex drawings than are usually found in a GD&T text. There are over 200 pages with many illustrations of drawings and solid models of actual parts drawn from industry.  In addition to containing the rules, terms and definitions of GD&T, this text makes exclusive use of the GD&T Hierarchy to explain the relationship between tolerances and to guide the reader to the most appropriate applications.

Highlights of the text include:
    Numerous Rules of Thumb
    Overlays to illustrate concepts
    Flowcharts
    Dynamic tolerancing diagrams
    Former practices
 
Table of Contents:

Chapter 1 - Introduction and Course Objectives Why GD&T Hierarchy? 

  • Introduction - Geometric Shapes 
  • Multi-functional Design Team     
  • What Is GD&T?         
  • Geometric Tolerances  
  • Evolution of Engineering Drawings     
  • Basic Dimensions
  • GD&T Symbols     
  • Statistical Tolerancing     
  • The GD&T Hierarchy     
Chapter 2 - Features     
  • Actual Envelopes     
  • Features of Size
  • Irregular Features of Size     
  • Material Condition Modifiers     
  • The Feature Control Frame  
  • Boundaries  
  • Individual Feature of Size, Rule #1  
  • Continuous Feature  
  • Independency Symbol  
  • Virtual Condition  
  • Applicability of Modifiers
  • Screw Thread Rule
  • Some Inspection Terms
Chapter 3 - Datums     
  • Degrees of Freedom 
  • Datum Feature Simulators 
  • Degrees of Freedom Chart  
  • Datum Precedence       
  • Multiple Datum Features  
  • Datum Feature Selection
  • Datums Must Be of Sufficient Size!
Chapter 4 - Datum Feature Controls  
  • Affect of Modifiers 
  • Rotational Constraint
  • Datum Translation,
  • Irregular features of Size as Datum Features  
Chapter 5 - Datum Concepts     
  • Simultaneous Requirements
  • Restraint Clarified
  • Datum Targets  
  • Movable Datum Targets  
  • The Coordinate System 
  • Labeling the Coordinate System  
  • Degrees of Freedom
  • Customized Datum Reference Frame
  • Mathematically Defined Surface  
  • Clarifying Applicable Boundaries
  • Repetitive Patterns of Features
Chapter 6 - Form:  Straightness, Flatness, Circularity and Cylindricity
  • Flatness 
  • Flatness Applied to a Size Dimension
  • Former Practice 
  • Sample Inspection    
  • Straightness
  • Sample Inspection
  • Circularity
  • Sample Inspection
  • Cylindricity
  • Sample Inspection
Chapter 7 - Orientation: Angularity, Perpendicularity and Parallelism
  • Perpendicularity
  • Sample Inspection
  • Parallelism
  • Sample Inspection
  • Angularity
  • Sample Inspection
  • When to Use Orientation Controls 
  • One Orientation Symbol
  • Tangent Plane
Chapter 8 - Profile 
  • Profile as a General Requirement
  • Application Options for Profile Summarized     
  • Unequally Disposed Profile
  • Unilateral Profile Tolerance
  • Composite Profile Tolerancing
  • Combined Controls
  • Coplanarity  
  • Non-Uniform Zone  
  • Profile per Unit Length  
  • Sample Inspection of Profile
Chapter 9 - Position and Symmetry
  • Position
  • Surface Interpretation  
  • Pattern Location
  • Composite Position Tolerancing
  • Inspecting Position
  • Projected Tolerance Zone
  • Symmetry
  • Sample Inspection
Chapter 10 - Coaxial Features
  • Position
  • Sample Inspection
  • Concentricity
  • Sample Inspection
  • FIM (Full Indicator Movement)
  • Runout
  • Sample Inspection
  • Runout Summary
  • Profile Controlling Coaxiality
  • Sample Inspection





Please review these other products:
Y14.5 Standard-Ease 2009
Electronic format of the ASME Y14.5-2009 Standard



Our Price: US$295.00

More Details

2009 PowerPoint Update
Y14.5-2009 PowerPoint Update
Our Price: US$697.00

More Details

2009 GD&T Wall Chart
Full Color Wall Chart in accordance with Y14.5-2009


Our Price: US$37.50

More Details

2009 The GD&T Hierarchy Pocket Guide (Y14.5-2009)
In accordance with the Y14.5-1994 and 2009 revisions of this ASME Standard
Full Color
By Don Day
ISBN 978-0-9792781-7-4
Our Price: US$15.95

More Details



Your Cart:

Your Cart Is Empty

Top Sellers

Information