• Premium Site
  • 1-888-TEC-EASE
  • Outside USA: 1-716-785-6015

ASME Y14.5-2009 to 2018 Update Coach - Corporate Web Access

SKU: 5300CWA
Price:
Price varies based on options.

Qty: - +
   - OR -   

Please call 716-785-6015 for Pricing.

This course will present the revisions made is the Y14.5-2018 Standard and is intended for those who are familiar with the Y14.5-2009 Standard. This is not for someone new to GD&T. 

Average time to take is 8 hours.  

Corporate Web Access Includes:

1) Take Online

2) 1 Year Access (Additional year options available)

3) Online access of textbook, no hard copies

4) Surpervisor access to run reports and see who is training

5) Tracks multiple students

6) Concurrent users based on number of seats purchased

Other options for this course includes Individual Web Access 

Section 1: Introduction to The ASME Y14.5 Update
Why make a revision to the Y14.5 Standard?
Principal Changes
Additions of Section 1 – 4
Scope
Mandatory, Recommended, Guidance and Optional Words


Section 2: References
Cited Standards


Section 3: Definitions
Boundary Inner and Outer Boundary
Boundary Least Material and Maximum Material Boundary
Datum Feature Simulator
Free State, Pattern, Regardless of Feature Size, Restrained
New Definitions
Deleted Definitions


Section 4: Fundamental Rules, Tolerancing, Defaults and Dimensioning Practices
Fundamental Rules
Repetitive Features and Dimensions


Section 5: Tolerancing, Interpretation of Limits, Limits of Size, and Material Condition Modifiers
Tolerance Expression
Angle Tolerances
Tolerance Accumulation Between Surfaces
Rule #1 The Envelope Principle (Variations of Form)
Exception of Rule #1
Directly Toleranced Radius
Controlled Radius Tolerance


Section 6: Symbology
Datum Target Symbol
Free State Symbol
Continuous Feature
Moveable Datum Targets
Dynamic Profile Tolerance Zone Modifier
From-To Symbol
Projected Tolerance Zone


Section 7: Datum Reference Frames
The Geometric Counterpart
Unit Vectors
Datum Feature Controls
Datum Features Applicable RMB
Effects of Straightness of Datum Simulation
Determining a Worst-Case Material Boundary
Translation Modifier
Common Datum Features
Offset Planar Datum Feature
Restrained Condition
Datum Reference Frame Identification
Customized Datum Reference Frames & Composite Tolerances


Section 8: Form
Form Controls on Continuous Features
LMC and Straightness
Circularity Feature Control Frame
Cylindricity Feature Control Frame


Section 9: Orientation


Section 10: Tolerances
Concentricity
Symmetry
MMC Intended for Clearance Fit Applications
Projected Tolerance Zone
Identifying Multiple Features of Size Within a Pattern
Separate Requirements Allowed for Datums Referenced at LMB


Section 11: Profile
Unilateral and Unequally Disposed Profile Tolerance
Additional Nonuniform Tolerance Zone Specification Method
Profile on Nonsize Datum Features
When the Toleranced Feature Includes Datum Targets
Profile with Continuous Feature
Orientation of Line Element Using Profile
Dynamic Profile Tolerance Zone


Section 12: Runout
Designed Interruptions are Ignored for Inspection
New Toleranced Zone Descriptions
Relationship Between Runout and Size Tolerances
Runout on a Tangent Plane
Runout Relative to an Axis of Rotation in an Assembly